This manual contains the information you need to install and use your PC Card. Unless specified, all references in this book to the PC Card apply to the IBM Turbo 16/4 Token-Ring PC Card 2.
On this CD-ROM are the installation aids, device drivers, and documentation for the PC Card.
This manual is intended for use by network administrators and other end users of the IBM Turbo 16/4 Token-Ring PC Card 2.
Introduction describes the features of the IBM Turbo 16/4 Token-Ring PC Card 2.
Installation describes the PC Card covered in this manual and gives a checklist for installation of the PC Card.
Inserting and Removing the PC Card describes the procedure for installing the PC Card into your computer.
Software Installation describes the procedure for software installation for a number of network operating environments.
LANAID describes the LANAID product.
Point Enablers and Card Services describes how to use the PC Card with these programs.
Appendix A, CD-ROM Content and Software Packages describes the CD-ROM content and how the software packages work.
Appendix B, Problem Determination describes troubleshooting procedures and fixes that might be needed for your environment.
Appendix C, Running the Diagnostics Program describes the diagnostics program, how to use it, and the error codes associated with it.
Appendix D, LANAIDC Parameter Information lists the keywords used in the LANAIDC program.
Appendix E, Token.lan and LAN Client Driver Parameters describes the keywords used in the token.lan file.
Appendix F, Parts Information lists the parts involved in this kit.
Appendix G, Notices and Warranty lists the legal notices required for the IBM Turbo 16/4 Token-Ring PC Card 2.
Refer to these publications for additional information:
www.networking.ibm.com
| Note: | SBOF-6221 and SC30-3587 replace Local Area Network Technical Reference, SC30-3383. |